EOSS System Doors & Windows (Shandong) Co., Ltd

 

 

1. The frame thickness is 91mm, the sash thickness is 100mm, and the visible width of the frame and sash combination is 114mm;

2. Adopts 54mm special-shaped insulation strips specially designed for the Eoss system;

3. The glass configuration is "5 pairs of Low-e + 16Ar warm edge + 5 pairs of low-e + 16Ar warm edge + 5 insulating glass, and the Uw value of the whole window is 1.0W/(㎡·k), with excellent air-tightness, water-tightness, wind pressure resistance, and thermal insulation performance.

 

 

1. The frame thickness is 101mm, the sash thickness is 110mm, and the visible width of the frame and sash combination is 149.5mm;

2. The 64mm special-shaped insulation strips specially designed for the Eoss system are used;

3. The glass configuration is "5 pairs of Low-e + 16Ar warm edge + 5 pairs of low-e + 16Ar warm edge + 5 insulating glass, and the Uw value of the whole window is 0.79W/(㎡·k), with excellent air-tightness, water-tightness, wind pressure resistance, and thermal insulation performance.

4. The ES101 series fire-resistant passive windows were the first to pass the 1-hour fire-resistant integrity test, achieving a technical breakthrough in fire resistance + passive, and are in a leading position in the industry.

 

 

 

 

1. A stepped drainage structure is adopted, and the indoor profile is higher than the outdoor profile to prevent rainwater from flowing back; and a diversion groove is designed on the outdoor profile and a drainage hole is opened to plan the flow of rainwater so that rainwater can be discharged smoothly to the outside, improving the water-tightness of the entire window.

2. The innovative design of the arch bridge-shaped glass holder avoids the accumulation of water in the gap between the profile and the glass, and plans drainage.

3. Three seals are adopted to improve the air-tightness, water-tightness, and thermal insulation performance of the entire window and prevent sand and dust from intruding.

4. The outside of the glass adopts soft and hard co-extruded composite strips, which have good ability to absorb compression deformation, lower heat transfer coefficient, and the dense layer is close to the outdoor side to achieve better sealing effect.

5. The frame and the wall use special installation adjustment parts, and the foaming agent is filled between the wall opening and the frame, and then the sealing glue treatment is used to make the sealing performance between the opening and the window frame better.

 

 

https://www.eosswindow.com/